The road reflectors  produced by our company is a clear and striking flashing warning sign. The road markings can be continuously formed to form an optical lane, clearly depicting the outline of the road. Especially in the foggy day and night can be high brightness display road and signs flashing light to play a clear guide to the role of warning.
   Is mainly used for highway, urban road ramp entrances and exits, road sharp turn, Lane in the middle of obstacles and roadway edge line, roadway demarcation line on the ground, especially in the Road fork, and Expressway exit ramp on the ground, detailed display of special road conditions.
   Our company has a matching active road reflector controller. Each controller has two outputs. The single-sided active road reflector suggest that each load should not exceed 200, that is, the maximum load of each controller can be one-sided active road reflectors 400 only. The double-sided active road reflector suggest that each load should not exceed 100, that is, each controller can load 200 double-sided road reflectors.


– Input voltage: AC 220V, 50Hz;
– The power input has a protection switch to ensure the safety of the control system;
– Output voltage: 24V DC.
– Number of output channels: 2 outputs or 4 outputs.
– Number of loads: Up to 200 road reflectors can be connected (2 outputs, each with a maximum load of 100 road reflectors).
– Safety: The controller has a leakage overload protection switch.
– Action mode: The flashing frequency is adjustable, the brightness is adjustable, the duty cycle is adjustable, always on, and off.
– Flashing frequency: 30~300 times/minute (continuously adjustable).
– Working mode: Local control / PLC control (optional: PLC control / RS232 / RS485, PLC control)
– Working environment: -40 ° C ~ +70 ° C.
– Fixed method: wall or flat, the installation position can be adjusted according to the actual situation.